7F Users Group – Page 2 – Combined Cycle Journal

7F Users Group

Groome positioned for growth, acquires W-S Companies

Groome Industrial Service Group, a recognized leader in specialty maintenance services across a broad range of industrial markets, is always working toward one goal: Provide top notch turnkey industrial services to every one of its clients, anywhere in the country. Groome took a huge step towards that goal when it recently announced the acquisition of […]

Groome positioned for growth, acquires W-S Companies Read More »

Simple solution removes varnish, increases turbine efficiency

Tackle varnish and improve turbine efficiency with Shell EcoSafe Revive Shell EcoSafe Revive is a solvency enhancer fluid that can be incorporated into most turbine oils to reduce the issues associated with varnish formation and fluid instability. Adding the recommended amount of Shell EcoSafe Revive requires no conversion process and reduces reliance on expensive varnish

Simple solution removes varnish, increases turbine efficiency Read More »

HERMISTON GENERATING PLANT, UNIT 2: Successful complete CCGT major outage with OOEM

Mechanical Dynamics & Analysis (MD&A) recently completed the major inspection and refurbishment of a 1 × 1 combined cycle at the Hermiston Generating Plant that successfully returned the facility’s turbines and generators to full and reliable operation. The project began with the full major inspection of a late-1990s-vintage, 170-MW 7FA gas turbine—including the robotic inspection

HERMISTON GENERATING PLANT, UNIT 2: Successful complete CCGT major outage with OOEM Read More »

Newington: Three best practices enhance safety, performance, O&M across Cogentrix fleet

Essential Power Newington Owned by Essential Power Investments Operated by Cogentrix Energy Power Management 565 MW, 2 × 1 7F-powered combined cycle equipped with a GE D11 steam turbine, located in Newington, NH Plant manager: Tom Fallon Flags make HV grounds visible to ensure proper installation Challenge. During maintenance outages when conducting high-voltage (HV) activities,

Newington: Three best practices enhance safety, performance, O&M across Cogentrix fleet Read More »

CPV St. Charles: Best practices from leading 7FA.05 facility

St. Charles Energy Center Owned by CPV Maryland LLC Operated by Consolidated Asset Management Services 745 MW, 2 × 1 7F.05-powered combined cycle equipped with a GE D11A steam turbine, located in Waldorf, Md Plant manager: Nick Bohl RO clean-in-place wastewater discharge mod reduces manhours, cost Background. St. Charles Energy Center uses two double-pass reverse-osmosis

CPV St. Charles: Best practices from leading 7FA.05 facility Read More »

Hunterstown: Plant personnel safety improves with remote racking devices

Hunterstown Generating Station Owned by Platinum Equity LLC Asset management by Competitive Power Ventures Operated by NAES Corp 810 MW, 3 × 1 7F.04-powered combined cycle equipped with a GE D11 steam turbine, located in Gettysburg, Pa Plant manager: Tom Hart (former), Mark Kadon (current) Challenge. Hunterstown’s obsolete robot made racking-out breakers more hazardous than

Hunterstown: Plant personnel safety improves with remote racking devices Read More »

CCC Norte III: Successful winterization plan increases plant reliability

38 CC Norte III Owned by Abeinsa Operated by NAES México 907 MW, 2 × 1 7F.04-powered combined cycle equipped with a Toshiba steam turbine, located in Chihuahua, Mexico Plant manager: Armando Burgueño Challenge. 38 CC Norte III is located in a region of Mexico with one of the country’s most extreme climates—very hot summers

CCC Norte III: Successful winterization plan increases plant reliability Read More »

7F USERS GROUP 2024: Loaded program features shop tour, dozens of technical presentations, 130 exhibitors, and much more

The world’s largest user organization supporting owner/operators of 7F gas turbines promises a robust in-person event when the group gathers at the Marriott St. Louis Grand, May 20-24, for its 2024 conference and vendor fair. This year’s program begins with a seven-stop tour of MD&A’s turbine/generator repair facility (users only) on Monday morning (May 20),

7F USERS GROUP 2024: Loaded program features shop tour, dozens of technical presentations, 130 exhibitors, and much more Read More »

7F USERS GROUP 2024: Technical program at a glance 

Editor’s note: Presenter names, times, and meeting rooms are as of April 23 and subject to change.  Monday, May 20 8 a.m. – noon, Tour of MD&A’s turbine/generator repair facility 1:30 – 4 p.m., MD&A session Presentations: 7F outage planning and solving issues—including best practices, inspection requirements, parts management, and risk mitigation. Richard Rucigay Rotor

7F USERS GROUP 2024: Technical program at a glance  Read More »

Scroll to Top