If you are not a generator specialist, the things you probably need to know about stator wedges are that they hold the stator bars in the iron, there are lots of them (1200-1800), and they can loosen from age or unusual or persistent vibrations, which interrupts electrical contact, leading to spark erosion. Testing them for […]
Stator repairs in the spotlight Read More »
If the CCUG 2021 Day One roundtable on cold-weather preparation is any guide, winterization continues to vex plant personnel. Many of the issues can be traced to inadequate design bases and insufficient equipment. However, the root cause appears to be building “outdoor” facilities in locations which clearly require far better protection against protracted frigid conditions.
Grid meltdown forces cold-weather prep to front burner Read More »
With winter just over the horizon, the roundtable on winterization at the 2021 conference of the Combined Cycle Users Group was perfectly timed. There are still a few weeks, depending on your plant’s location, to implement best practices shared by colleagues from Woodbridge Energy Center, Dogwood Energy, and others. By virtue of its location and
Lesson learned: Heat tracing demands constant attention Read More »
Why would NAES Corp, the largest third-party O&M services provider to combined-cycle facilities, run a three-day conference on NERC-related issues and compliance for its people and select clients and industry stakeholders? For one thing, NAES has 130 plants under its purview and supports over 100 plants outside its portfolio. Then you might ask: Why does
Management of compliance risks focus of NAES’ 2021 NERC conference Read More »
You can spend a lot of quality time pointing fingers towards whom or what was to blame for the cold-weather issues experienced in several electricity markets—most notably Ercot—during February 2021. But no question, many gas-fired plants and their fuel suppliers were ill-prepared for the sustained cold weather. Lessons that may have been learned during previous
Commentary: Industry suffers consequences from cold-weather-ops design decisions Read More »
The Eighth International European HRSG Forum (EHF 2022) will be conducted virtually May 17-19, 2022. Format: A three-hour program in English each day, beginning 9 a.m. Central European Summer Time (4 a.m. US East Coast time) and concluding at noon CEST. Call for presentations: This conference will feature both invited and contributed technical papers. Please
EUROPEAN HRSG FORUM: International conference, a virtual event, May 17-22, 2022 Read More »
The Fifth International Conference on Film Forming Substances (FFS 2022) will be conducted virtually March 22-23 and 29-30. Format: A three-hour program in English each day, beginning 9 a.m. Central European Time (4 a.m. US East Coast time) and concluding at 12:30 p.m. CET. The major themes of this event are dedicated to advancing the
This 4-part webinar series focuses on performance & efficiency enhancements for the aging turbine-generator fleet. Register today! Operational issues can arise during unit operation which can affect performance or lead to a forced outage. To keep you running and help address these operational challenges, MD&A leverages the diverse experience of our engineers and Subject Matter
Why you want to participate Finding a well-qualified generator expert for a specific assignment sometimes can challenge plant management, particularly so during the pandemic when inspecting machines and guiding maintenance and repairs may have to be done remotely. This Skill Register was developed in response to current needs. Every engineer with deep generator experience is
GENERATOR EXPERT SKILL REGISTER Read More »
Click name to access detailed information on each generator expert. Jamie Clark Jamie earned his BSME from Florida Tech as a Commissioned US Army Reserves Infantry Officer in 1996 and began his mechanical engineering career with General Electric in 1997 where he was responsible for the design of generator auxiliary systems ranging from hydrogen cooling
